Product ID:31038 IONAC NM-65
MSDS Date:03/13/1990
FSC:6810
NIIN:00N071017
MSDS Number: CBMYR

SYBRON CHEMICALS INC

BIRMINGHAM RD
BIRMINGHAM, NJ 08011
US

Emergency Phone: 800-424-9300(CHEMTREC)

Info Phone: 609-893-1100

Cage: 76465

SYBRON CHEMICALS INC,SUB OF SYBRON CORP

66 BIRMINGHAM, NJ 08011 US

Telephone: 609-893-1100

Cage: 76465

SULFONATED COPOLYMER OF STYRENE AND DIVINYLBENZENE IN

CAS: 69011-20-7

Fraction By Weight: 20-30%

OSHA PEL N/K

ACGIH TLV: N/K

TRINTETYLAMINE FUNCTIONALIZED CHLOROMETHYLATED COPOLYMAR OF

CAS: 69011-18-3

Fraction By Weight: 15-30%

OSHA PEL N/K

ACGIH TLV: N/K

(ING 2) (STYRENE DIVINYLBENZENE ANION EXCHANGE RESIN

CAS: 69011-18-3

OSHA PEL N/K

ACGIH TLV: N/K

17 @ 20C

CAS: 7732-18-5

RTECS: ZC0110000

Fraction By Weight: 50-60%

OSHA PEL N/K

ACGIH TLV: N/K

EXERCISED TO REMOVE ALL PROD FROM SKIN. THE PROD

RTECS: 9999999ZZ

& CAN CAUSE FALLS. SWEEP UP SPILLED MATL & TRANSFER

RTECS: 9999999ZZ

CONTAINERS VIA HYDRAULIC (WATER) SLURRY ALL SAFETY

RTECS: 9999999ZZ

SPACE MUST BE OBSERVED.

RTECS: 9999999ZZ

LD50 LC50 Mixture:NONE SPECIFIED BY MANUFACTURER.
Routes of Entry: Inhalation:NO Skin:NO Ingestion:NO
Reports of Carcinogenicity:NTP:NO IARC:NO OSHA:NO
Health Hazards Acute and Chronic:ACUTE: CAN PRODUCE MECHANICAL
IRRITATION TO THE EYE. MAY CAUSE SKIN IRRITATION OF HYPERSENSITIVE
PERSONNEL. CHRONIC: MECHANICAL IRRITATION TO THE EYE AND SKIN
IRRITATION TO HYPERSENSITIVE PERSONNEL.
Explanation of Carcinogenicity:NOT RELEVANT.
Effects of Overexposure:RED, IRRITATED EYES, ITCHING AND FEELING THAT A
PARTICLE EXISTS BETWEEN THE EYELID AND EYE.
Medical Cond Aggravated by Exposure:NOT APPLICABLE.

First Aid:INGEST: CALL MD IMMEDIATELY . INHAL: REMOVE TO FRESH AIR.
SUPPORT BREATHING (GIVE O*2/ARTF RESP) . EYES AND SKIN: FLUSH WITH
COPIOUS QUANTITIES OF WATER FOR AT LEAST 15 MINUTES. IF IRRITAT ION
PERSISTS, SEE A PHYSICIAN, AMERICANRED CROSS.

Extinguishing Media:DRY CHEMICAL, CARBON DIOXIDE OR WATER FOG.
Fire Fighting Procedures:USE NIOSH/MSHA APPROVED SCBA & FULL PROTECTIVE
EQUIPMENT . GUARD AGAINST CONTACT OF PRODUCT WITH EYE DURING
SALVAGE OPERATION.
Unusual Fire/Explosion Hazard:NONE SPECIFIED BY MANUFACTURER.

Spill Release Procedures:SWEEP AREA OF PRODUCT, COLLECTING IN A
CONTAINER FOR DISPOSAL, AREAS OF SPILL CAN BECOME EXTREMELY
SILPPERY. ALL NORMAL SAFETY PRECAUTIONS SHOULD BE OBSERVED.
Neutralizing Agent:NONE SPECIFIED BY MANUFACTURER.

Handling and Storage Precautions:NO SPECIAL HNDLG IS REQD BEYOND THOSE
OUTLINED IN THIS MSDS. AVOID PACKING PROD IN AN UNPROTECTED GLASS
COLUMN. EXPANSION OF THE PROD CAN (SUPDAT)
Other Precautions:STORAGE:AVOID FREEZING/PRLNG STORAGE ABOVE 50C
BECAUSE PROD CNTNS H*2O WHICH WILL FREEZE & DMG PROD/DRYOUT ALSO
DAMAGING THE PROD. AVOID CNTCT W/STRONG OXIDIZING AGENTS SUCH AS
NITRIC ACID. SPECIAL SH IPPING INFO: AVOID FREEZING. (SUPDAT)

Respiratory Protection:NIOSH/MSHA APPROVED RESPIRATOR APPROPRIATE FOR
EXPOSURE OF CONCERN .
Ventilation:NONE SPECIFIED BY MANUFACTURER.
Protective Gloves:IMPERVIOUS GLOVES.
Eye Protection:ANSI APPROVED CHEM WORKERS GOGGS .
Other Protective Equipment:ANSI APPRVD EMER EYE WASH & DELUGE SHOWER .
LONG SLEEVE SHIRTS & LONG TROUSERS ARE REC TO PREVENT SKIN CONTACT.
Work Hygienic Practices:FLUSH PRODUCT FROM HANDS WITH SOAPY WATER.
Supplemental Safety and Health
PH:(IN AN AQUEOUS SLURRY): 6-9. CNDTNS (STAB):PRESENCE OF STRONG
OXIDIZING AGENTS. HNDLG/STOR PREC:CAUSE THE GLASS COLUMN TO
SHATTER. OTHER PREC:CARE SHOULD BE TAKEN TO AVOID CONTACT WITH EYES
UNTIL H ANDS HAVE BEEN COMPLETELY CLEANED. PRODHAS A TENDENCY TO
CLING TO SKIN DUE TO STATIC CHARGE. CARE MUST BE (ING 5)

Vapor Pres:ING 4
Vapor Density:0.62
Spec Gravity:1.2
pH:SUPDAT
Evaporation Rate & Reference:1 (H*2O=1)
Solubility in Water:INSOLUBLE
Appearance and Odor:SPHERICAL BEADS; SLIGHTLY FLASHY ODOR.

Stability Indicator/Materials to Avoid:YES
STRONG OXIDIZING AGENTS SUCH AS NITRIC ACID.
Stability Condition to Avoid:CNDTNS UNDER WHICH PROD IS CHEMICALLY
UNSTABLE:AT TEMP ABOVE 204C DECOMP OCCURS. EXPLOSIVE RXN CAN OCCUR
IN THE (SUPDAT)
Hazardous Decomposition Products:CARBON MONOXIDE, CARBON DIOXIDE
STYRENE, DIVINYLBENZENE.

Waste Disposal Methods:NEW, UNUSED PRODUCT CAN BE DISPOSED OF AS
ORDINARY TRASH IN ACCORDANCE WITH ALL FEDERAL, STATE AND LOCAL
REGULATIONS. USED PRODUCT MUST BE TESTED FOR CONTAMINATION BY
HAZARDOUS MATERIAL AND DISPOSED O F ACCORDINGLY.

Disclaimer (provided with this information by the compiling agencies):
This information is formulated for use by elements of the Department
of Defense. The United States of America in no manner whatsoever,
expressly or implied, warrants this information to be accurate and
disclaims all liability for its use. Any person utilizing this
document should seek competent professional advice to verify and
assume responsibility for the suitability of this information to their
particular situation.